Mobile/Whastapp/Wechat:
Ms Alice:+86 18988789548
Hot Keywords:platinum cure silicone, non-toxic silicone, life casting silicone, mold making silicone

Silicone News
Operation Instruction for Making Printing Pads
- Categories:Silicone news
- Author:
- Origin:
- Time of issue:2018-05-18 14:42
- Views:
Operation Instruction for Making Printing Pads
Here we would like to show you the Operation Instruction for Making Printing Pads
1.Firstly, prepare the necessary tools, glass mold, glue, wood board, mixing knife, etc.
2.Spray a layer of release agent on the glass mold
3.Here we use HY-933 silicone rubber with the mixing ratio of 1:1. Weigh the part A and part B exactly. Then mix and stir it evenly.
4.Then put it into the vacuum machine. Vacuum to -0.1MPa, which can help to release the bubbles.
5.Pour the silicone rubber into the glass mold, then put the wood board on the silicone rubber
6.After 5 minutes, put it into the oven. Set the temperature to 50℃, grilled for about 2 hours until the silicone pads to be cured totally.
7.Take out the silicone pad from the glass mold when the silicone pad is cured.
8.The operation of silicone pad is finished. We suggest to put it into production after 24 hours.
Application field:
Coperation country:

Contact: Ms Alice Mobile/Whatsapp/Wechat:0086-189-8878-9548
Email: info@szrl.net Tel: 0086-755-89948294 / 89948019
QQ: 2355542502 Skype: alice621705
Address: Building A, No.3, Hongling First Road,Liulian Shibi, Pingdi Street, Long Gang District, Shenzhen, China
Copyright@ 2018 Shenzhen Hong Ye Jie Technology Co.,Ltd All rights reserved. 粤ICP备17107859号 SEOTag Powered by 300.cn