Mobile/Whastapp/Wechat:
Ms Alice:+86 18988789548
Hot Keywords:platinum cure silicone, non-toxic silicone, life casting silicone, mold making silicone

Silicone News
Operation Instruction of Pouring Way by Molding Silicone Rubber
- Categories:Silicone news
- Author:
- Origin:
- Time of issue:2018-05-18 14:42
- Views:
Operation Instruction of Pouring Way by Molding Silicone Rubber
1.Preparation
Prepare the necessary tools, such as rulers, knives, brushes, paper board, etc.
2.Fix the original mold and make a square frame
3.Spray or brush a layer of release agent
4.Weigh part A&part B according to the mixing ratio
5.Stirring evenly
Mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and bring problems in final operation.
What’s more, the finished molds will meet a short life.
6.Vacumm pumping
For releasing the air bubbles, after mixing evenly, put the mixture into vacuum pumping for 3-5 minutes.
7.Pouring
Pour the mixture into the frame from a corner, make the silicone rubber flow to the frame smooth.
8.Demoulding
After 3-5 hours, you can demould the silicone mold. We suggest to put the silicone mold into production after 24 hours.
Application field:
Coperation country:

Contact: Ms Alice Mobile/Whatsapp/Wechat:0086-189-8878-9548
Email: info@szrl.net Tel: 0086-755-89948294 / 89948019
QQ: 2355542502 Skype: alice621705
Address: Building A, No.3, Hongling First Road,Liulian Shibi, Pingdi Street, Long Gang District, Shenzhen, China
Copyright@ 2018 Shenzhen Hong Ye Jie Technology Co.,Ltd All rights reserved. 粤ICP备17107859号 SEOTag Powered by 300.cn